TMS zl Management and Configuration Guide ST.1.1.100430

4-67
Firewall
User Authentication
2. Click Add user group.
Figure 4-43. Add user group Window
3. For Group Name, type the same string that is configured in the Filter-ID
attribute on the external RADIUS server policy for authenticating your
users.
4. Click OK.
5. Click Save.
If your RADIUS server places users in multiple groups, repeat these steps to
add more groups.
Set Up a RADIUS Server to Work with the TMS zl Module. This sec-
tion provides guidelines for setting up a RADIUS server so that it can provide
authentication for users who log in through the TMS zl Module. You should
refer to your server’s documentation for precise instructions.
You must complete the following on your RADIUS server:
■ Add the TMS zl Module as a client. Set the shared secret to the same string
that you configured on the module when you specified this RADIUS
server.
■ Create one or more policies on the RADIUS server to authenticate your
users. Each policy must meet these criteria:
• The policy selects requests sent from the TMS zl Module.
Table 4-7 shows the attributes that the module includes with users’
authentication requests. You can use these attributes to ensure that
the request is matched to the proper policy. For example, you could
create policies that select requests from users who are in a particular
group.