TMS zl Management and Configuration Guide ST.1.1.100430

4-77
Firewall
User Authentication
41. For Server Address, type the address of your IAS.
42. For Secret and Confirm Secret, type the shared secret for your RADIUS
server. Be sure to set the same secret here that you did in step 9.
43. For NAS Identifier, type the NAS ID of your module. Be sure to set the same
identifier here that you did in step 6.
44. For Domain Name, type the name of the domain to which your server
belongs.
45. Click OK.
46. Now add the user group to which the RADIUS server assign these users.
Click the User Group tab.
47. Click Add user group.
Figure 4-53. Add user group Window
48. For Group Name, type the same string that is configured in the Filter-ID
attribute in step 31.
49. Click OK.
50. Click Save.
The module can now authenticate the users you specified in step 19 to the
network when the users browse to the TMS zl Module’s login page (the
module’s IP address) and type <username>@<domain name> and their password
on the login window. (The users must browse to the TMS zl Module’s login
page to authenticate; they will not be automatically redirected.)
To set up firewall access policies for these users, select the group that you
configured for them from the User Group list in the Firewall > Access Policies
> Unicast window.