TMS zl Management and Configuration Guide ST.1.1.100430

4-102
Firewall
Port Triggers
To perform this task, follow these steps:
1. Click Firewall > Port Triggers > Policies.
2. Click Add a port trigger.
3. In the Policy Name field, type VoIP.
4. From the Source list, select Any.
5. For Protocol/Ports, select Options and select Enter custom Protocol/Ports.
a. Select TCP.
b. Type 1584 and 1585.
6. Under Allow Inbound Connections to Source, do the following:
• Select TCP and type 51200 and 51210 in the Ports fields.
• Select TCP and then type 51210 in the Ports field.
7. Under Allow Outbound Connections from Source, do the following:
• Select UDP, then type 7175 in the Ports field.
• Select TCP, then type 8680 and 8686 in the Ports fields.
8. Select the Allow inbound connections from any machine check box.
9. Select the Enable this port trigger check box.
Figure 4-68. Add Port Trigger Window