TMS zl Management and Configuration Guide ST.1.1.100430

4-123
Firewall
Resource Allocation
■ If the current connection count in Zone1 is 10,100 (100 of which connec-
tions are to 10.1.2.22), and if 100 non-reserved connections are closed,
then the Zone1 limit will revert to its zone limit of 10,000. At this point the
Zone1 maximum connections (10,000) includes the reserved inbound
connections. Any other new connections from Zone1 to any zone will not
be successful. However, if the connection limits for other zones have not
been reached, new connections can be made to and from those zones. You
can also define timeouts for services.
In these examples the reservation is made across zones, but you can also make
reservations within a zone. For example, if you have workstations and servers
in the Internal zone, you can configure an inbound connection reservation to
the server IP address in the Internal zone.
Create Connection Reservations
To create a connection reservation, follow these steps:
1. Click Firewall > Settings and click the Connection Allocations tab.
Figure 4-84. Firewall > Settings > Connection Allocations Window
2. Click Add Connection Reservation.