TMS zl Management and Configuration Guide ST.1.1.100430

4-125
Firewall
Resource Allocation
To make the reservations shown in the figure above, follow these steps:
1. Click Firewall > Settings and click the Connection Allocations tab.
2. Click Add Connection Reservation.
3. From the Zone list, select Zone1.
4. From the Direction list, select Outbound.
5. In the Reserved for IP Addresses fields, type 10.1.1.100 and 10.1.1.102.
Note If you are reserving a connection for only one IP address, either type the
address in both fields or type the address into only the first field.
6. In the Reservation Count field, type 5.
7. Click OK.
Figure 4-86. Add Connection Reservation Window
8. Click Add Connection Reservation.
9. From the Zone list, select DMZ.
10. From the Direction list, select Inbound.
11. In the Reserved for IP Addresses fields, type 10.16.108.1 and 10.16.108.22.
12. In the Reservation Count field, type 10.
13. Click OK.