TMS zl Management and Configuration Guide ST.1.1.100430

5-36
Network Address Translation
NAT Examples
2. Create another single-entry network address object named VLAN2 that
contains 10.10.2.0/24.
3. Create a NAT policy to translate source addresses for traffic from Internal
to Zone5.
a. Select Firewall > NAT Policies > Policies.
b. Click Add Policy.
c. Select Source for translation type.
d. For From Zone, select INTERNAL.
e. For To Zone, select ZONE5.
f. For Service, accept the default: Any Service.
g. For Source, select VLAN10.
h. For Destination, select VLAN2.
i. For NAT IP address, type 10.10.2.17-10.10.2.19.
Figure 5-20. Add NAT Policy Window
j. Click OK.
k. Click Save.