TMS zl Management and Configuration Guide ST.1.1.100430

7-8
Virtual Private Networks
Introduction
Table 7-2. Selecting a VPN Type
Remote VPN Gateway or
Clients
VPN Type Configuration Instructions
for the TMS zl Module
Configuration Instructions for
the Remote Client or Gateway
HP ProCurve VPN Client
v10.7.7 (for Windows XP)
IPsec with IKE v1 client-to-
site VPN
“Configure an IPsec Client-
to-Site VPN” on page 7-28
“Configure an HP ProCurve
VPN Client” on page 7-365
• Windows XP SP2
clients
• Windows Vista SP1
clients
L2TP over IPsec client-to-
site VPN
“Configure an L2TP over
IPsec VPN” on page 7-143
• “Configure a Windows XP
SP2 Client for L2TP over
IPsec” on page 7-395
• “Configure a Windows
Vista Client for L2TP over
IPsec” on page 7-448
IPSecuritas for Macintosh IPsec with IKEv1 client-to-
site VPN
“Configure an IPsec Client-
to-Site VPN” on page 7-28
“Configure IPSecuritas
(Macintosh VPN Client)” on
page 7-377
ProCurve Secure Router
Series 7000dl
software version J.08.03
IPsec with IKEv1 site-to-site
VPN
“Configure an IPsec Site-to-
Site VPN with IKE” on page
7-77
See the Secure Router Series
7000dl documentation for
instructions
GRE tunnel
*Not recommended when
high security is required
“Configure a GRE Tunnel” on
page 7-188
GRE over IPsec VPN with
IKEv1
“Configure a GRE over IPsec
VPN with IKE” on page 7-209
TMS zl Module IPsec with IKEv1 site-to-site
VPN
“Configure an IPsec Site-to-Site VPN with IKE” on page 7-77
IPsec with manual keying
site-to-site VPN
*Not generally
recommended
“Configure an IPsec Site-to-Site VPN with Manual Keying” on
page 7-123
GRE tunnel
*Not recommended when
high security is required
“Configure a GRE Tunnel” on page 7-188
GRE over IPsec VPN with
IKEv1
“Configure a GRE over IPsec VPN with IKE” on page 7-209
GRE over IPsec VPN with
manual keying
*Not generally
recommended
“Configure a GRE over IPsec VPN with Manual Keying” on
page 7-265