TMS zl Management and Configuration Guide ST.1.1.100430

7-118
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with IKE
e. For Source, specify the IP address that you configured for the remote
gateway in the IKE policy.
You can select a previously configured address object or type the IP
address manually (click Options and select Enter custom IP, IP/mask or
IP-Range).
f. For Destination, specify the IP address that you configured for the
local gateway in the IKE policy.
You can specify the address manually or select a previously config-
ured address object. Alternatively, select Any Address.
Figure 7-100. Add Policy Window
g. Click Apply.
6. Permit IKE messages from the TMS zl Module to the remote gateway:
a. For Action, leave the default Permit Traffic.
b. For From, select Self.
c. For To, select the remote zone.
d. For Service, select isakmp.
e. For Source, specify the IP address that you configured for the local
gateway in the IKE policy.