TMS zl Management and Configuration Guide ST.1.1.100430

7-128
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with Manual Keying
Figure 7-109. Add IPsec Policy Window—Step 1 of 4
4. For Policy Name, type an alphanumeric string between 1 and 32 characters.
The string must be unique to this policy.
5. By default, the Enable this policy check box is selected, which means that
the policy will begin taking effect as soon as you finish it. Clear the check
box if you want to enable the policy later.
6. For Action, keep the default, Apply.
7. For Position, type a number.
The position determines the order in which the TMS zl Module processes
IPsec policies. The module processes the policy with the lowest value first
(for example, position 1 before position 2). The position matters most
when policies have overlapping traffic selectors. In this case, assign the
highest position (lowest value) to the IPsec policy with the most specific
traffic selector.
Note that you can specify a position that is already used by another policy.
The new policy is inserted above the former policy. You can use the arrow
icons in the Tools column in the VPN > IPsec > IPsec Policies window to
rearrange policies. Remember the policy at the top of the display is the
first policy processed.