TMS zl Management and Configuration Guide ST.1.1.100430

7-179
Virtual Private Networks
Configure an L2TP over IPsec VPN
Figure 7-150. Add Policy Window
g. Click Apply.
4. Allow IKE messages to the remote endpoints.
a. For Action, leave the default, Permit Traffic.
b. For From, select SELF.
c. For To, select the remote zone.
d. For Service, select isakmp.
e. For Source, leave Any Address or specify the IP address for the local
VPN gateway.
f. For Destination, leave Any Address or specify the address object for
remote endpoints.
5. Permit L2TP traffic from the remote endpoints:
a. For Action, leave the default, Permit Traffic.
b. For From, select the remote zone.
c. For To, select SELF.
d. For Service, select the l2tp-udp.
e. For Source, leave Any Address or specify the address object for remote
endpoints.