TMS zl Management and Configuration Guide ST.1.1.100430

7-260
Virtual Private Networks
Configure a GRE over IPsec VPN with IKE
Figure 7-227. Add Policy Window
g. Click Apply.
6. If you are using IKE, permit IKE messages from the TMS zl Module to the
remote tunnel endpoint:
a. For Action, leave the default Permit Traffic.
b. For From, select Self.
c. For To, select the remote zone.
d. For Service, select isakmp.
e. For Source, leave Any Address or specify the IP address configured for
the local gateway in the IKE policy.
f. For Destination, specify the IP address configured for the remote
gateway in the IKE policy.