TMS zl Management and Configuration Guide ST.1.1.100430

7-306
Virtual Private Networks
GRE Examples
Follow these steps to configure the OSPF settings:
1. To enable OSPF, click Network > Routing and click the OSPF tab.
Figure 7-264. Network > Routing > OSPF Window
1. Select the Enable OSPF check box.
2. For Router Identifier, type 0.0.0.99.
3. Leave other settings at their defaults.
4. Click Apply My Changes.
You should also configure any STUB or NSSA areas that you require. In this
example, the local network at site A is a stub area.
5. In the Network > Routing > OSPF window, click Add NSSA or STUB Area.