TMS zl Management and Configuration Guide ST.1.1.100430

7-342
Virtual Private Networks
GRE Examples
d. For Gateway Address, type 10.8.8.2.
e. For Metric, leave 0.
f. For Distance, type 1.
g. Click OK.
4. Create a floating static route to VLAN65 through the secondary GRE
tunnel:
a. Click Add static route.
b. For Destination Type, select Network.
c. For Destination Address, type 10.10.65.0/24.
d. For Gateway Address, type 10.9.9.2.
e. For Metric, leave 2.
f. For Distance, type 1.
g. Click OK.
h. Click Save.
Create the Primary GRE Tunnel for Site B
1. In the left navigation pane of the Web browser interface, click VPN > GRE.
You are at the GRE Tunnels tab.
Figure 7-298. VPN > GRE > GRE Tunnels Window
2. Click Add GRE Tunnel.The Add GRE Tunnel window is displayed.
3. For Tunnel Name, type toVLAN10.
4. For Tunnel IP Address, type 10.8.8.2.
5. For Peer IP Address, type 10.8.8.1.
6. For Firewall Zone Association, select ZONE5.
7. For Source IP Address, type 192.168.55.22.
8. For Destination IP Address, type 172.23.20.99.
9. Select the Enable Keepalive check box.
10. For Periods, accept the default setting, 10.