TMS zl Management and Configuration Guide ST.1.1.100430

7-358
Virtual Private Networks
Manage VPN Connections and GRE Tunnels
■ Bytes Processed—the number of bytes received or transmitted by this SA
■ NAT Status—whether the SA is using NAT-T
■ IP Compression Status—whether the SA supports IP compression
Clear SAs
Sometimes you might want to clear a VPN connection before the SA lifetime
expires. Clearing a connection closes the associated SA or tunnel on the
TMS zl Module. However, if the remote gateway or client initiates a new
connection, the module will reopen the tunnel.
Follow these steps to clear VPN connections:
1. In the left navigation bar of the Web browser interface, click VPN > IPsec.
2. Click VPN Connections.
Figure 7-306. VPN > IPsec > VPN Connections Window
3. To clear an IKE SA, follow these steps:
a. Select the SA from the list in the IKE Security Associations section.
b. Click Flush above.