TMS zl Management and Configuration Guide ST.1.1.100430

7-359
Virtual Private Networks
Manage VPN Connections and GRE Tunnels
4. To clear an IPsec tunnel, follow these steps:
a. Select the SA from the list in the IPsec VPN Tunnels section.
b. Click Flush above.
View IP Address Pools
You can view information about the pools that you have created for IKE Mode
Config as well as addresses currently assigned to remote endpoints. In the left
navigation bar, click VPN > IPsec. Click the IP Address Pool tab.
Figure 7-307. VPN > IPsec > IP Address Pool Window
The IP Address Pool Records section displays the pools configured in IPsec
policies:
■ Name—the name of the IPsec policy in which the pool is configured
■ IP Address Ranges—the range or ranges of IP addresses in the pool (the
TMS zl Module assigns one of these addresses to each remote endpoint
that connects)
■ Primary DNS—the primary DNS server assigned to remote endpoints
■ Secondary DNS—the secondary DNS server assigned to remote endpoints
■ Primary WINS—the primary WINS server assigned to remote endpoints
■ Secondary WINS—the secondary WINS server assigned to remote end-
points