TMS zl Management and Configuration Guide ST.1.1.100430

7-372
Virtual Private Networks
Configure an HP ProCurve VPN Client
c. For SA Life, select Seconds. Then type the number of seconds config-
ured on the module.
d. For Key Group, select the DH group configured on the module.
Table 7-32 displays the default settings for a TMS zl Module IKE policy.
Table 7-32. Default TMS zl Module IKE Settings
17. If you enabled the XAUTH server in the module’s IKE policy, for Authen-
tication, select Preshared Key; Extended Authentication.
18. In the left navigation pane, expand Key Exchange (Phase 2) and click
Proposal 1.
Figure 7-319. ProCurve VPN Client—Security Policy Editor—Key Exchange
Proposal Window
Parameter Default Setting
Authentication Algorithm MD5
Encryption Algorithm 3DES
SA Life 28800 seconds
Diffie-Hellman (DH) Group 1