TMS zl Management and Configuration Guide ST.1.1.100430

7-480
Virtual Private Networks
Configure a Windows Vista Client for L2TP over IPsec
Figure 7-433. Windows Vista—Connect to a workplace > How do you want to
connect Page
70. Click Use my Internet connection (VPN).
71. For Internet address, type the TMS zl Module’s public IP address.
This IP address must be the Local Gateway IP Address in the IKE policy
configured on the TMS zl Module. Often, it is the IP address on a VLAN in
the External zone.
72. For Destination name, type a meaningful name for the connection.
73. Select the Don’t connect now; just set it up so I can connect later check box.