TMS zl Management and Configuration Guide ST.1.2.100916

7-496
Virtual Private Networks
Configure a Windows Vista Client for L2TP over IPsec
L2TP User account (one user for each client if used)
User Matches the username submitted by the
remote client
Add L2TP User—Step 1 of
2
User name configured in
step 75 on page 7-486
Password Match the string submitted by the remote
client
Password configured in
step 76 on page 7-486
User Group The group on the TMS zl Module that has
been configured with access policies for
the remote user
Authentication
Protocol
•Any
•CHAP
•PAP
• MS-CHAP
Protocols selected in step
86 on page 7-490
Server IP Address Any IP address in a private subnet not in
use in your network
Add L2TP User—Step 2 of
2
User IP Address Any IP address that is:
• In the same subnet as the server IP
address
• Not assigned to another dial-in user
•Primary DNS
Server
• Secondary DNS
Server
•Primary WINS
server
• Secondary WINS
server
IP addresses of your network’s servers
(to which TMS firewall access policies
permit the remote client access)
Parameter Valid Settings Configuration Window Matching Setting on the
Windows Vista Client