TMS zl Management and Configuration Guide ST.1.2.100916

7-499
Virtual Private Networks
Configure a Shrew Soft VPN Client for Windows
Figure 7-444. Shrew Soft VPN Client for Windows > General Tab
4. Define the remote host, which is the TMS zl Module with which this client
is establishing a tunnel. Under Host Name or IP Address, type the IP address
specified as the local gateway in the module’s IKEv1 policy. All IKE and
IPsec communications will be sent to and from this IP address.
5. Under Local Host, define the IP addressing that the client will use on the
VPN connection. The client should receive its IP address from the TMS zl
Module, which should be configured to act as an IRAS server in the IPsec
policy.
Follow these steps:
a. For the Auto Configuration option, specify IKE config pull.
b. For the Address Method option, select Use a virtual adapter and assigned
address.
c. Leave the Obtain Automatically check box selected.