TMS zl Management and Configuration Guide ST.1.2.100916

7-500
Virtual Private Networks
Configure a Shrew Soft VPN Client for Windows
Figure 7-445. Shrew Soft VPN Client for Windows > General Tab
6. Click the Client tab. If a NAT device exists between your client and the
TMS zl Module, ensure that enable is selected for NAT Traversal.
7. Click the Name Resolution tab.
8. Select the Enable DNS check box and the Enable WINS check box if your
network provides that service.
9. If the TMS zl Module is using IRAS, select the Obtain Automatically check
boxes for the services that you enabled.
Otherwise, clear these check boxes and type the IP addresses manually.
Also type the correct DNS suffix.