TMS zl Management and Configuration Guide ST.1.2.100916

7-503
Virtual Private Networks
Configure a Shrew Soft VPN Client for Windows
b. For Identification Type, select the Local ID Type specified in the TMS zl
Module’s IKEv1 policy.
c. In the field below, type a string that matches the Local ID Value in the
module’s IKEv1 policy.
If you selected IP Address for the type, you can select the Use a
discovered remote host address check box.
Figure 7-448. Shrew Soft VPN Client for Windows > Authentication Tab > Remote
Identity Subtab
14. Click the Credentials subtab and configure the credentials for the authen-
tication method that you have selected.
• If you selected Mutual PSK or Mutual PSK + Xauth, for Pre Shared Key,
type the same string configured on the module.
• If you have selected Mutual RSA or Mutual RSA + Xauth, you must
upload a CA certificate file for the CA that signed the TMS zl Module’s
IP address, a certificate file for the client, and a private key file for
that certificate.