TMS zl Management and Configuration Guide ST.1.2.100916

8-20
High Availability
Configuring High Availability
2. Access the master’s Product OS context:
The prompt should look like the following:
hostswitch(tms-module-E)#
3. Enter the participant’s global configuration.
hostswitch(tms-module-E)# configure terminal
4. Disable high availability and optionally delete HA settings:
5. Save the current configuration and reboot the module.
When asked if you would like to reboot the module and if you want to save
the current configuration, type
[y].
Syntax: services <slot ID> < <product index> | name <product name> >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in
which the module is installed.
Replace <product index> with the product index assigned
tot he TMS zl Module. See “Understanding Index Num-
bers” on page 2-18 of Chapter 2: “Initial Setup in Routing
Mode.”
Replace <product name> with tms-module. The TMS zl Mod-
ule’s Product OS context is always assigned the product
name tms-module.
Syntax: configure terminal
Enters the configuration context for the module.
Syntax: no high-availability
Disables HA on the master while retaining the startup-
config. (When removing the master from an HA cluster,
do not include the delete-cluster-data option. This option
is used to delete the startup-config when you remove a
participant from an HA cluster.)
Syntax: boot
Reboots the module