TMS zl Management and Configuration Guide ST.1.2.100916

9-53
Routing
Viewing Unicast Routes
Table 9-25. Module D Stub Area Settings
Table 9-26. Module D Routing Table
Viewing Unicast Routes
To view static routes, as well as routes discovered with RIP and OSPF, follow
these steps:
1. Click Network > Routing, and then click the View Routes tab.
Figure 9-18. Select Unicast Routes
2. Select Unicast from the Show routes list.
The window displays all of the unicast routes that the module knows (includ-
ing floating routes) and shows where it learned the route. When you redistrib-
ute RIP or OSPF routes, those routes are listed as “connected” routes.
ID Area Type Metric Metric Type
0.0.0.2 STUB 1
Destination Gateway Metric VLAN Ty p e
0.0.0.0/0 10.1.6.1 2 vlan6 ospf
10.1.2.0/24 10.1.6.1 3 vlan6 ospf
10.1.5.0/24 10.1.6.1 2 vlan6 ospf
10.1.6.0/24 10.1.6.1 1 vlan6 connected
10.1.7.0/24 10.1.7.1 1 vlan7 connected