TMS zl Management and Configuration Guide ST.1.2.100916

10-10
Troubleshooting
Basic Troubleshooting Tools
For example, Figure 10-2 shows the type of output you will see when you enter
the
show connections command.
Figure 10-2. Output for the show connections Command
If you enter the show system-information command, you will see output similar
to that shown in Figure 10-3.
Figure 10-3. Output for the show system-information Command
Table 10-3 lists some useful show commands for the TMS zl Module when it is
operating in routing mode. (For a complete list of
show commands, see Appen-
dix A, “Command-Line Reference.”)