TMS zl Management and Configuration Guide ST.1.2.100916

10-55
Troubleshooting
Troubleshooting the TMS zl Module in Routing Mode
Figure 10-9. Intrusion Prevention > Settings > Actions Window
4. If necessary, click Apply My Changes.
You can also check the IPS setting from the CLI. Enter:
hostswitch(tms-module-C)# show ips
You will see output similar to the following. (The output of some commands
will use IPDS, which refers to the IPS.)
IPDS: Enabled
Last Signature Status: Error occurred during last update.
Could not resolve domain
Last Signature Download : None
Signature Version : RLX.10.2.2.82
IPDS Subscription Hardware ID: SG860GG080-H-Y3K27GV-
G238R79-RKXHVYK-3MCVJYF
IPDS Full Inspection : Disabled