TMS zl Management and Configuration Guide ST.1.2.100916

A-15
Command-Line Reference
Services OS Operator Context Commands
Figure A-2. Services OS Operator Context
The following sections describe commands that are available from the oper-
ator context of the Services OS.
exit
To leave a specific interface or configuration context, enter exit. The exit
command moves you back one mode level. For example, if you were in the
HA configuration context and entered exit, you would return to the global
configuration context.
Syntax: exit
This command is available from all contexts.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or Ctrl+C.
Syntax: [no] page
ping
Use this command to send an ICMP echo to a specified destination.
Syntax: ping < IP address | hostname >
Replace <IP address> with the IP address of the ping destination.
Replace <hostname> with the hostname of the ping destination.
The module displays the number of pings sent and responses received.