TMS zl Management and Configuration Guide ST.1.2.100916

A-27
Command-Line Reference
Product OS Operator Context Commands
Table A-7 provides an example of a host switch that is running:
■ DCM on a ONE Services zl Module
■ TMS zl Module
On this host switch, DCM was installed and booted first, so the host switch
assigned it index number 2. It then assigned the TMS zl Module index number 3.
Table A-3. CLI Display of Services
For example, if you want to enter the operator context for the Product OS for
the TMS zl Module in slot C, enter one of the following commands:
hostswitch> services c 3
hostswitch> services c name tms-module
To verify your location in the CLI, check the prompt. In the Product OS
operator context, the prompt is hostswitch(tms-module-<slot
ID>)>.
Figure A-5. Product OS Operator Context
The following sections describe commands that are available from the oper-
ator context of the Product OS.
Slot Index Description Name
C,D, E 1. Services zl Module services-module
D 2. Data Center Connection Manager dcm
C,E 3. Threat Management Services zl Module tms-module