TMS zl Management and Configuration Guide ST.1.2.100916

A-31
Command-Line Reference
Product OS Operator Context Commands
For example, to send a ping to a device with the IP address 192.168.115.104:
hostswitch(tms-module-<slot ID>)> ping 192.168.115.104
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives. If you need to halt a ping
operation, press
Ctrl+Z.
Note If you cannot ping a device, check that an access policy allows ICMP/Echo
traffic from the Self zone to the zone you are trying to ping.
snapshot
This command creates a restore point for your network. The snapshot com-
mand captures information about the following:
■ Kernel
■ Hardware
■ Log files
■ Software
■ File systems
■ Networks
■ Services
■ Miscellaneous files
■ Third-party software
To take a snapshot, type the following command:
Syntax: snapshot
traceroute
This command pings an IP address and displays the hops that the packet takes
en route to the destination.
Syntax: traceroute <IP address> [extended options]
Replace <IP address> with the IP address of the final destination to which
you want to trace the route.
The module will display a route to a destination up to 255 hops away. You can
end the traceroute process at any time by pressing
Ctrl+Z.