TMS zl Management and Configuration Guide ST.1.2.100916

A-54
Command-Line Reference
Global Configuration Context
banner
Set the banner that is displayed on the Web browser interface login page.
Syntax: [no] banner motd <banner text>
Replace <banner text> with the text that you want to display on the Web
browser interface login page. This text cannot contain any spaces or special
characters.
batch
This command enables or disables batch, or scripting, mode.
Syntax: [no] batch
This command is also available from the Product OS manager context.
boot
This command exits the current session and reboots the module. Before
exiting the session, you will be asked to confirm that you want to reboot the
module.
Syntax: boot
This command is also available from the Product OS manager context.
capture
The capture command shows the current packets on a VLAN interface, a GRE
tunnel, an HA interface, or all interfaces. This command is useful for trouble-
shooting connection problems and monitoring network activity because it
allows you to see all of the packets that are moving across a particular
interface.
The capture command will capture all Layer 2 frames received on a VLAN
interface, regardless of whether the firewall policies allow or deny the packets
within. For traffic being sent from a VLAN interface, however, this command
will capture only those packets that are permitted. (The packets that are
denied never actually reach the VLAN interface.)