TMS zl Management and Configuration Guide ST.1.2.100916

A-66
Command-Line Reference
Global Configuration Context
Replace <username> with the username on the account on your FTP or SCP
server.
These commands are also available in the Product OS manager context.
dhcp-relay
This command enables (or disables) DHCP relay globally:
Syntax: [no] dhcp-relay
This command adds (or deletes) the DHCP servers to which the module
forwards DHCP requests.
Syntax: [no] dhcp-relay server <server address>
Replace <server address> with the IP address for your DHCP server.
For example:
hostswitch(tms-module-<slot ID>:config)# dhcp-relay
server 10.10.2.54
You can enter the command multiple times to add up to four DHCP relay
servers.
dhcp-relay-enable
This command enables (or disables) DHCP relay for VLANs on the module.
Syntax: [no] dhcp-relay-enable vlan <VLAN ID>
Replace <VLAN ID> with the ID of the VLAN.
For example:
hostswitch(tms-module-<slot ID>:config)# dhcp-relay-
enable vlan 5
Note You cannot delete a VLAN association if DHCP relay is enabled on the VLAN,
even if DHCP is disabled globally.