TMS zl Management and Configuration Guide ST.1.2.100916

A-88
Command-Line Reference
Global Configuration Context
hostswitch(tms-module-<slot ID>:config)# radius-server
host 192.168.12.36 secret password nas-id tms-module
hostswitch(tms-module-<slot ID>:config)# l2tp radius-
auth 10.2.2.1
hostswitch(tms-module-<slot ID>:config)# l2tp radius-
auth domain-config global ip-pool 10.2.2.2 10.2.2.254 dns
primary 192.168.12.200
l2tp local-user
To create or edit (or delete) a local L2TP user account and enter the L2TP User
context, enter the following command:
Syntax: [no] l2tp local-user <username>
Replace <username> with the name for this user (1 to 16 alphanumeric
characters).
After entering this command, you will be moved to the CLI’s L2TP User
context. See “L2TP User Context” on page A-164.
lldp
This command enables (or disables) Layer Link Discovery Protocol.
Syntax: [no] lldp
Global domain IP settings
Start IP address 10.2.2.2
End IP address 10.2.2.224
Primary DNS server 192.168.12.200
Secondary DNS server —
Primary WINS server —
Secondary WINS server —
Parameter TMS zl Module Setting