TMS zl Management and Configuration Guide ST.1.2.100916

A-105
Command-Line Reference
Global Configuration Context
radius-server
Use this command to specify the TMS zl Module’s RADIUS server. You can
configure several RADIUS parameters:
■ RADIUS protocol
•MS-CHAP
•CHAP
•PAP
■ Host IP address
■ Secret key
■ NAS IP address or hostname
■ Domain name
To specify the RADIUS protocol that the module will use, enter the following
command:
Syntax: radius-server protocol < ms-chap | chap | pap >
To specify a RADIUS server, enter the following command:
Syntax: radius-server host <IP address> secret <secret key> nas-id <NAS ID>
[domain-name <domain name> [strip-domain] ]
Replace <IP address> with the IP address of the RADIUS server.
Replace <secret key> with your RADIUS server’s secret key.
Replace <NAS ID> with the TMS zl Module’s NAS ID on your network.
If you use the optional domain-name option, replace <domain name> with the
domain name associated with your RADIUS server. In this case, users who
authenticate to this RADIUS server must submit their username followed by
@<domain name>. Use the optional strip-domain option to configure the
module to remove the domain name from the credentials before forwarding
them to the RADIUS server.
sqlnet ssh syslog tacacs-tcp
tacacs-udp talk-tcp talk-udp telnet
tftp time uucp who
whois xdmcp
user-configured service objects