TMS zl Management and Configuration Guide ST.1.2.100916

A-119
Command-Line Reference
Global Configuration Context
Replace <VLAN ID> with the VLAN ID.
Replace <zone> with the zone to which you are assigning the VLAN. Valid
options are:
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6
■ <user-named zone>
The allow-switch-ip option allows the switch to also have an IP address on this
VLAN. The unique-mac option configures a unique MAC address for the TMS
VLAN (otherwise, every TMS VLAN shares a MAC address).
vpn
This command is a VPN management command that clears an IKE or IPsec
SA (VPN tunnel) before the SA lifetime expires. Clearing an IKE SA closes the
temporary SA that is used to establish a VPN connection. Clearing an IPsec
SA closes the associated connection (or tunnel). In either case, if the remote
gateway or client initiates a new connection, the module can reopen the SA
as long as other settings permit.
To clear IKE SAs or IPsec VPN tunnels, enter the following command:
Syntax: vpn connections < ike-sa | tunnel > flush
write
This command is a file management command that manages the running-
config file. This command is similar to the copy command. The write memory
command saves the running-configuration to the startup-configuration. You
can enter the write memory command from any context.
Syntax: write memory