TMS zl Management and Configuration Guide ST.1.2.100916

A-124
Command-Line Reference
IKEv1 Context
For example:
hostswitch(tms-module-<slot ID>:ikev1)# authentication
exchange-mode main method preshared-key
Preshared Key:**********
Confirm Preshared Key:**********
identities
To configure the local ID that the TMS zl Module sends to authenticate itself
and the remote ID that the remote gateway or clients sends to authenticate,
type the following command:
Syntax: identities local type <local ID> remote <remote ID>
For <local ID> and <remote ID> specify one of the options shown in
Table A-37. The local ID must match exactly (in both type and value) the
remote ID configured on the remote endpoint and vice versa. You can include
wildcards for the remote ID, which helps the policy to match multiple remote
clients.
Note When you use certificates for IKEv1 authentication, you must match local and
remote IDs to subject names in the module’s and remote endpoints’ certifi-
cates.