TMS zl Management and Configuration Guide ST.1.2.100916

A-146
Command-Line Reference
IPsec Policy Context
Figure A-13. IPsec Manual Keys Context
The IPsec Manual Keys context includes the commands that are specific to
configuring an IPsec policy that uses manual keying. Before you can enter this
context, you must set the IPsec proposal for the policy (use the proposal
command in the IPsec policy apply context).
To enter the IPsec Manual Keys context, enter the following command from
the IPsec policy apply context:
Syntax: key-exchange-method manual
When you enter the context, the CLI will inform you of the proper number of
characters for the encryption and authentication keys based on the algorithms
in the proposal.
To verify your location in the CLI, check the prompt. In the IPsec manual keys
context, the prompt is hostswitch(tms-module-<slot
ID>:ipsec:apply:manual)#.
To exit the IPsec manual keys context, enter the following:
Syntax: exit