TMS zl Management and Configuration Guide ST.1.2.100916

A-166
Command-Line Reference
L2TP User Context
Note For the group name, you can use up to 14 alphanumeric characters plus the
space, period, comma, hyphen, (-), exclamation mark (!), string ($), at sign
(@), asterisk (*), and underscore (_). Do not use the hash sign (#) in the group
name.
See “user group” on page A-115 for complete information.
dns
Enter the following command to set the DNS servers for authenticated L2TP
clients:
Syntax: dns primary <server address> [secondary <server address>]
Replace <server address> with the IP address of a DNS server to which the
remote client is allowed access.
preview
Before you apply the user settings, you should preview them to make sure
everything is correct. To preview your user settings, enter the following
command:
Syntax: preview
For example:
hostswitch(tms-module-<slot ID>:config:l2tp)# preview
Preview L2TP Dial-in User
---------------------------------------------
User Authentication
User: user1
Password: ******
Policy Group Name: guest
Authentication Protocol: Any
Tunnel Configuration
Server IP Address/Mask: 10.2.3.1/24
User IP Address: 10.2.3.2
Primary DNS Server: [not set]
Secondary DNS Server: [not set]
Primary WINS Server: [not set]
Secondary WINS Server: [not set]