TMS zl Management and Configuration Guide ST.1.2.100916

A-186
Command-Line Reference
VLAN Context
zone
Use this command to change the zone with which the VLAN is associated. You
can also configure whether the switch has an IP address on this VLAN or
whether the VLAN has a unique MAC address on the module.
Syntax: zone <zone> [allow-switch-ip] [unique-mac]
Replace <zone> with the zone to which you want to assign the VLAN. Valid
options are:
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6
■ <user-named zone>
Replace <zone> with the zone to which you are assigning the VLAN. Valid
options are:
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6
■ <user-named zone>
The allow-switch-ip option allows the switch to also have an IP address on this
VLAN. The unique-mac option configures a unique MAC address for the TMS
VLAN (otherwise, every TMS VLAN shares a MAC address).