TMS zl Management and Configuration Guide ST.1.2.100916

A-194
Command-Line Reference
Product OS Show Commands
show gre
This command shows the GRE tunnels that are configured.
Syntax: show gre [tunnel name]
For detailed information about a specific GRE tunnel, including traffic statis-
tics, replace <tunnel name> with the name of the GRE tunnel. If you do not
include a tunnel name, all GRE tunnels are listed (with less information).
show high-availability
This command shows the HA configuration.
Syntax: show high-availability
show ip
This command shows interface information as well as routing information.
To view the IP addresses that are assigned to TMS VLANs (as well as the
VLANs’ zone), enter this command:
Syntax: show ip
You can also add options to this command to view information about:
■ RIP
■ OSPF
■ The routing table
■ The multicast routing table
■ PIM
■ IGMP configuration
■ DNS server settings
The sections below document these options.