TMS zl Management and Configuration Guide ST.1.2.100916

A-201
Command-Line Reference
Product OS Show Commands
Syntax: show l2tp user [username]
Optionally, replace [username] with the name of a specific user. In this case,
you will see detailed information about the user. If you do not specify a user
name, this command lists all local L2TP users with more limited information
about them.
show lldp
This command shows the LLDP configuration.
Syntax: show lldp
show logging
This command shows all of the logging information. You can view information
about:
■ Local logging (and reverse local logging)
■ Syslog forwarding
■ Email forwarding
■ SNMPv2 and SNMPv3 trap destinations
■ Logging thresholds
To view the local logging information, enter the following command:
Syntax: show logging local [reverse] [filter options]
This command will display the local log with the most recent first. Optionally,
enter reverse to display the most recent log last.
You can set filter options for refining the logging information that is displayed
by typing additional keywords at the end of the command. You can specify
several combinations of the extended options shown in Table A-50, and you
can enter the options in almost any order.