TMS zl Management and Configuration Guide ST.1.2.100916

A-203
Command-Line Reference
Product OS Show Commands
Syntax: show nat
show operating-mode
Use this command to view your operating mode.
Syntax: show operating-mode
show port-map
This command shows all of your port-maps.
Syntax: show port-map
show port-trigger
This command shows your port trigger policies.
Syntax: show port-trigger [trigger name]
show radius-server
This command shows information about your RADIUS server.
Syntax: show radius-server
show rate-limit
This command shows the firewall access policies to which rate-limiting is
applied. You can view the policies according to group or type of policy (unicast
or multicast).
To view a rate-limiting policy, enter the following command:
Syntax: show rate-limit [group <group name>] [id <rule ID>]
Replace <group name> with the name of the group for which you want to view
the policies.
Replace <rule ID> with the rule ID.