TMS zl Management and Configuration Guide ST.1.2.100916

C-7
Log Messages
Log Message Formats and Fields
rcvdsc integer Total number of bytes received from the server to the client
ruleaction [permit | deny] The value in the Action field of the access policy
ruledsc [rule position] access-
policy [source zone]
[destination zone] [permit |
deny] service [service]
[source address]
[destination address]
(ID:[rule ID])
Description of the access policy in the format shown, which is the same
format as in the CLI. The service name and source and destination
addresses will show the named object if the object was specified in the
access policy.
rulefromzone text From zone as defined by the rule for which this message is generated; may
or may not be the same as the source zone (srczone) of the packet
rulepos integer Priority of the rule within its policy set; displayed in the Position column of
Firewall > Access Policies > Unicast/Multicast.
ruletozone text To zone as defined by the rule for which this message is generated; may or
may not be the same as the destination zone (dstzone) of the packet
sent integer Total number of bytes sent from the client to the server
sentsc integer Total number of bytes sent from the server to the client
src [x.x.x.x] Source address in the IP packet header
srcnatipaddr [x.x.x.x] Source IP address after NAT
srcnatport 0–65535 Source port after NAT
srcport 0–65535 Source port in the IP packet header
srczone text Source zone of the packet
subfamid text Log message subfamily name
throttledcount integer Total number of messages that have been throttled. First message will be 0,
and then subsequent messages will have a throttled count equal to the
number of additional messages that are encountered that meet the
throttling criteria.
usergroup text Firewall user group, as configured on Network > Authentication > Local
User.
userid integer Authenticated firewall user id
Field Name Value Format Description