TMS zl Management and Configuration Guide ST.1.2.100916

2-41

Initial Setup in Routing Mode

Access the Web Browser Interface

Once you have configured the initial settings (as described in the previous

section), you can access the TMS zl Module’s Web browser interface through

a secure HTTPS session. You will need a supported Web browser:

■ Firefox 2.x or higher

■ Internet Explorer 7 or higher

Additionally, JavaScript must be enabled on your Web browser.

In the address bar, type https:// followed by your module’s IP address. For

example, if your module has the IP address 192.168.2.102, type https://

192.168.2.102.

Note If you are running Firefox 3, ensure that you have an ActiveX plug-in; other-

wise, some of the features in the Help Files will not function.

The TMS zl Module has a self-signed digital certificate, which is not created

or signed by a well-known, trusted entity (such as VeriSign). As a result,

Internet Explorer and Firefox will display a warning when you access the TMS

zl Module’s Web browser interface through HTTPS for the first time.

The follow sections describe the steps to enable JavaScript and access the

TMS zl Module’s Web browser interface through a secure HTTPS session on

these browsers:

■ “Firefox 3.x” on page 2-41

■ “Internet Explorer 7 or 8” on page 2-43

Firefox 3.x

1. Enable JavaScript.

a. In your browser, click Tools > Options.

b. In the top navigation bar, click Content.

c. Select the Enable JavaScript check box.