TMS zl Management and Configuration Guide ST.1.2.100916

2-50
Initial Setup in Routing Mode
Access the Web Browser Interface
Table 2-9. Information in the Summary Tab on the TMS zl Module Dashboard
Field Description How to Configure
System Information
Hostname User-defined module name (maximum of 30
ASCII characters). Default: TMS-zl-Module
System > Settings > General
Serial Number Module serial number Preconfigured
Software Version Number of the currently running Product OS
version
System > Maintenance > Update Software
Operating Mode Module operating mode (routing or monitor)
Default: routing
System > Settings > Operating Mode
See “Change the Operating Mode” on page 2-59.
High Availability Module’s role in the HA cluster
System > Settings > High Availability
See “Configuring High Availability” in Chapter 8: “High
Availability.”
Log Level Which severity level of events are logged
(critical, major, minor, warning, information)
Default: critical
System > Logging > Settings
See “Configure Event Logging” on page 2-76.
Current Time System date and time Derived from the host switch.
Uptime A mount of time that has elapsed since the
module was last booted
n/a
Chassis Name Host switch name Derived from the host switch.
Chassis IP Host switch IP address; if there is no IP
address configured on the switch, this field
will read “no switch Manage.”
Derived from the host switch.
Chassis Slot Slot letter where the TMS zl Module is
installed
Derived from the host switch.
System Resources
CPU Usage Percentage of TMS zl Module processor
cycles being used (real and cached)
n/a
Memory Usage Percentage of real and cached memory
being used on the TMS zl Module. High
memory usage during low activity periods
does not necessarily signal a problem; the
cache memory may not have flushed
recently.
n/a
Latest Critical Alerts
List of alerts with the severity level of
Critical, with the most recent alert at the
top
n/a; See all alerts on System > Logging > View Log