TMS zl Management and Configuration Guide ST.1.2.100916

2-51
Initial Setup in Routing Mode
Access the Web Browser Interface
Firewall
Zone Name of the firewall zones n/a
Connections Number of connections into and out of the
zone. See the “Note” that follows this table.
n/a
Limit Maximum number of connections permitted
for that zone
Firewall > Settings > Connection Allocations
See “Connection Reservation Concepts” in Chapter 4:
“Firewall.”
Usage Percentage of the connection limit that is
being used currently
n/a
Attempted
Connections
Number of connection attempts per second
for the entire firewall
n/a
Intrusion Prevention
Packets Inspected Number of packets per second that the IDS
is currently inspecting
n/a
Packets Blocked Number of packets per second that the IPS
is currently blocking (Action: Block the
traffic)
Intrusion Prevention > Settings > Actions
See “Configure IPS Actions (Routing Mode Only)” in
Chapter 6: “Intrusion Detection and Prevention.”
Sessions
Terminated
Number of sessions per second that the IPS
is currently terminating (Action: Terminate
the session)
Intrusion Prevention > Settings > Actions
See “Configure IPS Actions (Routing Mode Only)” in
Chapter 6: “Intrusion Detection and Prevention.”
Signatures version The version of the signature file that the
module is using to filter traffic
Intrusion Prevention > Signatures
See “Configure Signature Detection” in Chapter 6:
“Intrusion Detection and Prevention.”
VPN
IPsec Packets In Number of IPsec packets that arrive per
second*
n/a
IPsec Packets Out Number of IPsec packets that are sent per
second*
n/a
*If you configure a VPN using GRE over IPsec or L2TP over IPsec, this field will include the IPsec packets that encapsulate
GRE and L2TP packets.
Field Description How to Configure