TMS zl Management and Configuration Guide ST.1.2.100916

2-64
Initial Setup in Routing Mode
Modify Management Settings
Figure 2-32. Add RADIUS server Window
4. In the Server Address field, type the IP address or FQDN of your RADIUS
server. The port is always 1812.
5. In the Secret and Confirm Secret fields, type the shared secret for your
RADIUS server.
6. In the NAS Identifier field, type the NAS ID associated with the module.
The default NAS Identifier is the module’s hostname.
Note The NAS-Identifier is only sent for CHAP and MS-CHAP authentication
requests (not for PAP requests).
7. Optionally, for Domain Name, type the domain name associated with your
RADIUS server.
When the TMS zl Module authenticates users to an external RADIUS
server, it selects the authentication server based on the domain name.
Therefore, when management users attempt to log in to the TMS zl
Module, they should type <username>@<domain name> and their pass-
word on the Web login page.