TMS zl Management and Configuration Guide ST.1.2.100916

2-82
Initial Setup in Routing Mode
Configure Event Logging
Configure Syslog Forwarding
To forward event logs to a syslog server, click System > Logging and click the
Syslog Forwarding tab. You can add up to three entries.
Figure 2-45. System > Logging > Syslog Forwarding Window
1. Select the Enable syslog forwarding check box.
2. Click Add Syslog Server. The Add Syslog Server window is displayed.
Figure 2-46. Add Syslog Server Window
3. For Address, type the IP address or FQDN of the syslog server.
4. For Port, type the port number on which the syslog server listens. The well-
known port for syslog is 514.
5. From the Facility list, select the facility from which the events will be sent.
6. Click OK.
7. Click Save.
Use the Edit and Delete icons in the Tools column to alter or remove a syslog
server.