TMS zl Management and Configuration Guide ST.1.2.100916

4-61
Firewall
User Authentication
■ Group—This column lists every user group configured on the TMS zl
Module
■ Username—This column lists the username for every local user in each
group
■ Inactivity Timeout—This column lists the number of seconds of inactivity
allowed to this user before the connection times out and the user must
log in again.
The module has one default user group, guest. You can add users to this group,
or create groups of your own and add users to them.
Create a User Group. To add a user group, follow these steps:
1. In the Network > Authentication > Firewall/XAUTH Users window, click Add
user group. The Add user group window is displayed.
Figure 4-38. Add user group Window
2. For Group Name, type the name of the user group.
Note You can create user group names that are up to 14 characters, using
alphanumeric characters and the following special characters: the space,
period, comma, exclamation point (!), asperand sign (@), hash sign (#),
dollar sign ($), asterisk (*), hyphen (-), and underscore (_).
3. Click OK. The group is now displayed in the Network > Authentication >
Firewall/XAUTH Users window.
4. Click Save.
Create Users. To add a user to a group, complete the following steps:
1. You should be in the Network > Authentication > Firewall/XAUTH Users
window.
2. In the row for the group to which you want to add users, click Add user.
The Add user window is displayed.