TMS zl Management and Configuration Guide ST.1.2.100916

4-63
Firewall
User Authentication
Configure Authentication to an External RADIUS Server
The TMS zl Module supports the following RADIUS servers:
■ Microsoft IAS
■ Microsoft NPS
■ RHEL 5.3 with the latest RH supported FreeRADIUS server
■ SLES 11 with the latest SuSE supported FreeRADIUS server
To set up authentication to the RADIUS server, complete the following tasks:
1. Specify the RADIUS server.
See “Specify the RADIUS Server” on page 4-63.
2. Create user groups.
See “Create User Groups” on page 4-66.
3. Set up the RADIUS server.
See “Set Up a RADIUS Server to Work with the TMS zl Module” on page
4-67.
See “Example RADIUS Configurations” on page 4-68 for step-by-step instruc-
tions on setting up authentication to several types of RADIUS servers.
Specify the RADIUS Server. To configure RADIUS settings, complete the
following steps:
1. Click Network > Authentication > RADIUS.
Figure 4-40. Network > Authentication > RADIUS Window