TMS zl Management and Configuration Guide ST.1.2.100916

4-65
Firewall
User Authentication
Figure 4-41. Add RADIUS server Window
2. In the Server Address field, type the IP address or FQDN of your RADIUS
server. The port is always 1812.
3. In the Secret and Confirm Secret fields, type the shared secret for your
RADIUS server.
4. In the NAS Identifier field, type the NAS ID associated with the module.
The default NAS Identifier is the module’s hostname.
Note The field NAS-Identifier is only sent for CHAP and MS-CHAP authentica-
tion requests (not for PAP requests).
5. Optionally, for Domain Name, type the domain name associated with your
RADIUS server. This field is not case-sensitive.
When the TMS zl Module authenticates users to an external RADIUS
server, it selects the authentication server based on the domain name.
Therefore, when users attempt to log in to the TMS zl Module, they should
type <username>@<domain name> and their password on the Web login
page.
You may also choose to leave this field blank. When you leave the Domain
Name field blank, the TMS zl Module assigns the RADIUS server to the
global domain. Then, when users log in using the TMS zl Module's login