TMS zl Management and Configuration Guide ST.1.2.100916

4-82
Firewall
User Authentication
17. Click OK twice, and then click Next.
18. Select Access Granted and click Next.
19. Select the check box or boxes for the type of RADIUS authentication used
on your network.
20. Review the policy settings, and then click Finish.
21. Double-click the policy.
22. In Settings, select Filter-ID.
23. Type the name of the user group to which users who authenticate with
the policy are assigned. For example, type the name of the users’ Windows
group.
24. Click OK.
25. On the TMS zl Module, create a firewall access policy that permits
RADIUS and RADIUS-ACCT traffic from the Self zone to the zone in which
your NPS resides. In most cases the NPS will be located in a management-
access zone, so policies permitting this type of traffic are configured by
default. See “Firewall Access Policies” on page 4-22.
26. On the TMS zl Module, click Network > Authentication > RADIUS.
Figure 4-59. Network > Authentication > RADIUS Window
27. For Authentication Protocol, select the protocol that your RADIUS server
uses. Be sure to select the same protocol here that you did in step 19.
28. Click Apply My Changes.
29. Click Save.